Wega Espresso Coffee Machine Instruction Manual download pdf (Page 10)

espresso coffee machine - instructions for the user

nglish

5.6 EVD VERSION

Dispensing coffee

• put the coffee cup under the dispensing spout;

• press the desired dose key: wait for dispensing to finish (LED comes on);

• to stop coffee delivery in advance, press the delivery key again or press the STOP key;

• if the push button panel malfunctions or is locked, use the manual switch.

Programming

• Place the programming lever (1) in the ON position. It is located under the front

right-hand panel of the body;

• put the coffee cup under the dispensing spout.

• press the PROG/STOP key

(2) and all dose key LED will come on;

• press the desired dose key

(3);

• when the desired dose has been attained, confirm by pressing the PROG/STOP key (2)

;

• repeat this operation for the other dose keys.

• upon completion of programming, place the programming lever

(1) back in the OFF

position.

In other models to access programming it is necessary to use a special key switch.

To exit programming it is sufficient to wait a few seconds.

NOTE

The programming of every dose must be done with ground coffee and not with previously used grounds.

With machines having two or three groups, by ﬁ rst programming the right-hand push buttons the others are automatically

programmed. It is however both possible and advisable to program the push button panels independently, always starting

from the right-hand push button panel.

STOP

PROG

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

No comments

Wega Espresso Coffee Machine Instruction Manual Page 10